Home > Products > Underground Mining Equipment > Underground Concrete machinery > Underground Concrete Mixers
Place of Origin: |
China |
Model Number: |
Concrete mixer truck |
Certification: |
Available |
Dimension |
7650x2310x2580mm |
Maximum stiring capacity |
6m² |
Condition |
New |
Description：
The system features a custom-built chassis, four-wheel drive, four-wheel steering, and a hydraulic system, ensuring high reliability, a tight turning radius, and strong road adaptability. A custom-designed pump specifically designed for domestically produced accelerators offers a long service life and a low failure rate. A world-class controller ensures even greater control system reliability and simplified operation. A large-diameter, long-stroke delivery cylinder provides high outlet pressure, effectively reducing pulsation and pipe blockage. Its built-in high-power air compressor eliminates the need for external air supply for construction.
Specifications：
Quick Detail:
Part |
Project |
Main technical parameters |
|
Maximum stiring capacity (m²) |
6 |
Bidirectional adjustable speed(rpm) |
0～16 |
|
Concretemixing drumoperation method |
Hydraulic |
|
Rear anti-spill lid |
Hydrauic opening/closing |
|
Discharge height(mm) |
1250±50 |
|
Overalldimensions(lengthx width x height,mm) |
7650×2310×2580 |
|
Empty weight(kg) |
10020 |
|
Full load weight(kg) |
24420 |
|
|
Diesel engine |
Diesel engine power (kW) |
176 |
spclfcation |
6cylinder turbocharged intercooler |
|
Fuel tank(L) |
248 |
|
engine emissions |
Non-Road CountryⅢI |
|
|
Walking system |
Maximum walking speed (km/h) |
20 |
Maximum speed on a 14%slope(no load)(km/h) |
20 |
|
Maximum speed on a 14%slope(fully loaded)(km/h) |
10 |
|
Maximum climbing ability(full lad) |
30% |
|
Drive mode |
four wheel drive |
|
steering method |
four wheel steering |
|
Transmission mode |
hydrostatic transmision |
|
Minimum turning radius(m) |
6.5 |
|
Brake type |
Multi-disc wet service brake+parking brake(negative) |
|
Tires/rims |
Mining 12.00-R20 |
|
|
Water supply system |
Flow rate (L/min) |
80 |
Maximum working pressure (bar) |
3 |
|
Water tank(L) |
248 |
|
Washing water pump with hose reel and water jet | ||
|
Electronic control system |
Control method |
IP67 grade dedicated controler |
Display mode |
7-inch touch screen |
|
Voltage(V) |
24 |
|
Driving lights(W) |
4×48 |
|
Working light(W) |
8×48 |
|
|
Other equipment |
FOPS/ROPS enclosed cab |
|
fire extinguisher |
4KG dry powder fire extinguisher |
|
diesel catalytic conwerter |
Specialexhaust gas treatment device(KA) |
|
Applications:
It is widely used in support operations in the construction of various tunnels, shafts, culverts, etc. in the fields of railways, highways, water conservancy, metallurgy, etc.
Competitive Advantage:
The mining concrete mixer truck features a specially designed chassis tailored for mining conditions, boasting lightweight and compact design.
The powerful 6-cylinder, 176kW diesel engine delivers a maximum speed of no less than 20 km/h on flat ground and no less than 10 km/h on a 14% gradient when fully loaded, with a maximum climbing angle of no less than 18°.
Imported Italian wet-type axles meet mining safety requirements and offer high reliability.
The four-wheel drive, with a fixed front axle and oscillating rear axle, ensures effective tire contact on rough roads, providing excellent road adaptability and quick transitions.
The four-wheel steering and minimum turning radius of 6.5 meters allow for easy entry and exit of mine tunnels.
The specially designed chassis tailored for mining conditions features lightweight, compact design, and superior bending and torsional resistance, enabling it to carry at least one cubic meter more concrete than similar trucks, even at a similar gross weight.
Hydraulic inserts from leading international manufacturers such as SUN and EATON ensure a reliable and excellent hydraulic system. The maximum stirring capacity is 6 cubic meters, the highest in China and abroad that meets mine height restrictions (under 2.6 meters).
The patented tail cover sealing and centering technology effectively eliminates slurry leakage and seal damage.
The electrical system utilizes an imported LS brand, with an IP67-rated controller and output, offering multiple protections for enhanced safety. The Taiwan WINVIEW touch screen displays real-time equipment status and fault conditions, making operation more intelligent and user-friendly. The enclosed cab, which meets FOPS (Falling Object Surveillance) requirements, ensures operator safety.
After-sale Service
Pre-sale
We hope to establish a good, long-term and mutually beneficial relationship with our customers. We will understand
customers’demand so that recommend the most suitable products for them.
In sale
Customers’ requirements will be put in the first place. During this period, we will communicate with customers in time if they have any questions need to be confirmed.
Post-sale
24 Hours Online service. When the equipment needs repair, we can provide online maintenance guides and support.
Services
Underground mining equipment requires regular maintenance to ensure optimal performance and safety. This may involve routine inspections, lubrication, replacement of parts, We can provide some tool boxes and provide a lifetime supply of spare parts.
FAQ
1. Who are we? Our headquarter is located in Shandong, China. Our strength manufacturing plant. We adhere to the leading technology, quality, integrity-based, the pursuit of excellence for the purpose.
2.Will you provide some wearing parts of your products? Yes, of course.If you need, we will provide with the products.
3.How is the quality of your products? We have been approved of ISO, and our products accord with national and international standards.Our products all contain warranty.
4.What payments term do you accept? We accept L/C,T/T and D/P etc,T/T goes with 30% advanced payment after signing contract or order confirmation.
EN